Cessna Stainless Steel Fuel Drain Valve Kits

Benefits include
Durability
Stainless steel construction

FAA approvals
TSO C76 - FAA standard for fuel drain valves
STC SA01380CH - Eligible for installation on aircraft with for original wings
and wings modified by Cessna Service Kits SK206-XX
as an alternate means of compliance for AD84-10-01R1
• View flowchart for determining applicable kit number
• View photos of Cessna original & modified valves
• View STC eligibility listing

Less hassle
If your wing has been modified by any of the kits SK206-xx and you are installing a new cell, the AD requires the installation of service kit SK206-27 or -28 in accordance with service letter SE84-9. The Cessna valve P/N 84C that was installed under the AD is made of aluminum. It corrodes and gets clogged easily so most people need a new one. To make it worse, if you want to clean the valve, you must remove it. To remove it you have to partially remove the fuel cell. Our STC makes it simple because it is approved as an alternate means of compliance for this AD and it cleans up the bottom of the wing.

Cost saving
Our kits include 2 stainless steel drain valves and the necessary hardware to do both wings for half the price.
Original - 2 Cessna adapter plates @ $189 ea. = $366 + the valves
Modified - 2 Cessna service kits @ $69ea. + 2 Cessna 84C valves @ $114ea =$366
Our kits are only.... $189. Discounts are available.

Simplified valve maintenance
Throw away the corroding aluminum valve from Cessna that isn't serviceable without partially removing the fuel cell. Once our stainless steel valves are installed, you can drain, clean, or change the standard o-ring from under the wing without removing the fuel cell.

Recommended by
Owners, Aircraft Associations, IA & A&P’s